Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving Bloomington, MN

Graffiti Removal for Concrete in Bloomington, MN

Pressure wash with a surface cleaner for concrete. Removing spray paint and marker from brick, concrete, stucco and stone, using removers matched to the surface. Typical cost $200-$800.

The secret to graffiti removal for concrete is using the right method, not the most pressure. In Bloomington, MN, we match the cleaner and pressure to the surface so it comes out clean without damage. For concrete, that means pressure wash with a surface cleaner.

The right method for the job

Pressure wash with a surface cleanerCleaning method
Usually 2,500-3,500 PSI with a rotary surface cleaner for even resultsPressure

Cleaning solution: A degreaser for oil spots and a pre-treatment for organic growth; post-treatment slows regrowth.

What to know about cleaning concrete

Plain broom-finish concrete is the surface pressure washing is made for. A rotary surface cleaner gives an even finish without the stripes a wand leaves, and hot water helps with grease and oil.

Avoid: Holding a narrow tip close to the surface, which etches lines into the cream layer of the concrete.

How often: Every year, or every 6 months in shaded, damp spots.

Is it time for graffiti removal for concrete?

  • Spray paint or marker on walls, fences or signs
  • Ghost marks left from earlier removal

What causes the dirt and stains

  • Vandalism
  • Shadowing left by paint that soaked into porous masonry

Easy upkeep between cleanings

  • Photograph it for your records or police report first
  • Don't paint over it with a color that won't match
  • Ask about anti-graffiti coatings for repeat targets

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

Common mistakes to avoid

  • Driving paint deeper into porous masonry
  • Damaging the surface with the wrong solvent
  • Leaving a 'clean' patch that stands out

Our process for graffiti removal for concrete

  1. Identify the paint and the surface
  2. Test a remover on a small area
  3. Apply remover and let it dwell
  4. Rinse with pressure suited to the surface
  5. Treat shadowing or apply a protective coating

How much does graffiti removal for concrete cost?

$200-$800Typical range for a typical wall or tag area
1-3 hoursTypical time on site
As needed; fast removal discourages repeat taggingRecommended frequency

What moves the price:

  • Area and number of buildings
  • Scheduling: early-morning, overnight or weekend work
  • Whether wash water has to be recovered under local stormwater rules
  • Frequency: recurring service is usually priced lower per visit

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Other services for concrete

Local graffiti removal for concrete for Bloomington, MN

Commercial properties in Minnesota usually get a big spring clean of sidewalks, entrances and parking areas to remove sand, salt and winter litter, and many schedule a second visit in the fall.

Besides Bloomington (ZIP codes 55420, 55431 and 55435), we handle graffiti removal for concrete in Richfield (3 mi), Edina (4.2 mi), Savage (4.7 mi) and Burnsville (5.1 mi). Call (877) 658-5887 for a free quote in Bloomington.

Graffiti Removal for Concrete: frequently asked questions

How much does graffiti removal for concrete cost in Bloomington, MN?

Graffiti Removal for Concrete typically costs $200-$800 for a typical wall or tag area, and usually takes 1-3 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (877) 658-5887 for a free quote.

Do you use high pressure for graffiti removal for concrete?

For concrete: usually 2,500-3,500 PSI with a rotary surface cleaner for even results. What we avoid: holding a narrow tip close to the surface, which etches lines into the cream layer of the concrete. We keep the pressure even and controlled, with the right tools for the surface.

Is graffiti removal for concrete safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule graffiti removal for concrete?

Every year, or every 6 months in shaded, damp spots. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Bloomington, MN

HOA & Apartment Pressure Washing

Building washing, sidewalks, breezeways, pools and amenity areas for HOAs, apartments and condos.

Typical $800-$5,000

Roof Cleaning for Asphalt Shingle Roofs

Soft wash (no pressure). The black streaks on many asphalt roofs are a type of algae, often Gloeocapsa magma, that feeds on the limestone filler in shingles.

Typical $400-$1,000

Patio Cleaning for Flagstone

Low-to-moderate pressure wash. Flagstone covers several stones, including sandstone, slate, bluestone and limestone, and they react differently to pressure and chemicals.

Typical $150-$400

Soft Washing for Cedar Shake Roofs

Soft wash. Cedar shakes grow moss and lichen and turn gray as the wood weathers.

Typical $300-$800

Concrete Sealing for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $400-$1,200

Deck Restoration & Staining for Cedar

Low-pressure wash. Cedar decks and fences turn silver-gray as the surface weathers.

Typical $800-$2,500

House Washing for Stucco

Soft wash. Traditional stucco is porous and holds moisture, which is why it streaks green and black in humid and shaded spots.

Typical $300-$700

Deck Cleaning for Pressure-Treated Wood

Low-pressure wash. Pressure-treated pine is the most common deck and fence wood.

Typical $250-$600

Pressure Washing for Flagstone

Low-to-moderate pressure wash. Flagstone covers several stones, including sandstone, slate, bluestone and limestone, and they react differently to pressure and chemicals.

Typical $150-$600

Pressure Washing for Travertine

Low-pressure wash. Travertine is a natural limestone popular around pools.

Typical $150-$600

Patio Cleaning for Stamped Concrete

Moderate-pressure wash. Stamped and colored concrete is usually protected by a sealer.

Typical $150-$400

Soft Washing for Tile Roofs

Soft wash. Clay and concrete tile roofs grow algae, moss and lichen, especially in shade.

Typical $300-$800

Ready for a cleaner home or business?

Get a free pressure washing quote in Bloomington, MN. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote